CONTACT US

ECOFAN ® – A FAN OF BILLION OPPORTUNITIES.

INDIVIDUALISED FAN FOR THE PRICE OF A SERIAL PRODUCT

The Ecofan® product range comprises both small and large axial and radial fans. The basic flow range of our fans (Q = ~0.1…800 m 3 /s) covers a major part of all the fan needs in the world.

An individualised Ecofan® unit consists of billions of opportunities, from which the best solution in view of the intended use is selected and produced. Thanks to its modular product structure, Koja’s Ecofan® solution meets the special requirements of even a highly challenging application – up to a temperature of thousands of degrees Celsius, and with the competitiveness of the standard product.

Applications for explosive atmospheres

Our standard product range comprises centrifugal fans for explosive atmospheres in on- ground applications in facility categories ATEX Ex II Zone 1, 2, 21 and 22, and in underground applications in facility category ATEX Ex I M2.

Adjustable-blade axial fans

We address the largest fan needs with adjustable-blade axial fans in collaboration with CFE Technologies GmbH.

SAFE KOJA QUALITY

Facility categories ATEX Ex II 1, 2, 21 and 22 as well as Ex I M2 are regarded as potentially explosive atmospheres. The EU Directive 2014/34/EU sets out special requirements on the safety of equipment in potentially explosive atmospheres. More detailed requirements for fan drives are set out in EN 14986:2017 and, outside the EU, in AMCA 99-0401 "Spark A".

SUPERIOR ENGINEERING COMPETENCE

Koja’s technical solutions have been proven in a wide range of applications since 1935. The best possible solutions are based on process and design competence and wide range of alternative solutions. Our competence also comprises CFD and strength analysis and measurements to cater for all fan and process needs.

APS axial fans

Adjustable-blade axial fan range especially for heavy-duty process exhaust applications. Pressure-casted aluminium propeller, acid-proof cast for special cases.
- Flow rate: 0.2…60 m 3 /s
- Pressure increase: < 2 kPa
- Temperature range: < 90°C

E series centrifugal fans

Direct, belt and switch driven fans in all size categories in one and two inlet configurations.
- Flow rate: 0.1…800 m3/s
- Pressure increase: up until 65 kPa
- Temperature range: >1000°C

 

KOJA’S EXPERTS AT YOUR SERVICE

A uniquely optimised solution suitable to the process where the units are intended to be used is durable and energy-efficient. Koja has delivered more than 20,000 fans all over the world. Our seasoned experts will help you to address any fan needs you may have.

CONTACT US

Ask more from process fan experts:

03 2825 111
processfans(at)koja.fi

CONTACT US

Uutiskirje tilattu!

TILAA UUTISKIRJE